Printer okidata C5800 Error Codes

Machine Check Exception Error Code 001
A serious problem has been detected on the CU board
Solution:
Seek attention of service person if restarting the printer does not correct the problem.


DSI Exception Error Code 002
When the program has attempted to look up an invalid address
Solution:
Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears

ISI Exception Error Code 003
When the program has attempted to look up an invalid address
Solution:
Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears.


Alignment Exception Error Code 004
When the program has attempted to look up an invalid address
Solution:
Note the 24-digit addresses (usually 3), then restart the printer. Check reproducibility if possible. Repeat the same operation after restarting the printer and check if the same service call message appears.


RAM Configuration Error Error Code 034
RAMs have been mounted in the wrong order
Solution:
Check the specification and install the RAMs in correct order.

Warning: The green image drum surface is very delicate and light sensitive. Do not touch it and do not expose it to normal room room light for more than 5 minutes. if the drum unit needs to be out of the printer for longer than this, please wrap the cartridge inside a black plastic bag to keep it away from light. Never expose the drum to direct sunlight or very bright room lighting